---
title: "Dynamic vs Static QR Codes: How a Dynamic QR Code Works"
description: "A static QR code stores the page's address itself. A dynamic QR code stores a short link, and a server redirects each scan to the current page. Step by step."
canonical: "https://linkbreakers.com/help/article/dynamic-vs-static-qr-codes-key-differences"
last-updated: 2026-11-16
---

# Dynamic vs Static QR Codes: How a Dynamic QR Code Works

> A static QR code stores the page's address itself. A dynamic QR code stores a short link, and a server redirects each scan to the current page. Step by step.

Video: [How a Dynamic QR Code Works: Static vs Dynamic, the Short Link and the Redirect](https://www.youtube.com/watch?v=eF1KqPlYRrg)

## Short answer

A **static QR code** stores the destination's full web address in its squares. Once it is printed, it opens that address forever. A **dynamic QR code** stores a short link instead: an address on the QR service's own server. When someone scans it, the phone opens the short link, the server looks up the destination saved for it and answers with a **redirect** (an HTTP status code such as 302, 303 or 307, with the real address in a `Location` header), and the browser follows it to the page. Change the saved destination and the very next scan goes to the new page, with the same printed code.

Because every scan passes through that server, a dynamic code can also count scans and send different visitors to different pages. Use a dynamic code for anything you print more than once or might need to change. Use a static one only for a destination that will never move and that you never need to measure.

## How a dynamic QR code works

### A QR code stores text, nothing more

The QR code is defined by the international standard **ISO/IEC 18004:2024**: how characters become black and white squares (modules), how error correction is added, and how a reader turns the squares back into the characters. A web address is stored as plain text, byte by byte. Your phone's camera decodes the squares and, when the text is a web address, offers to open it in the browser.

The standard has no "static" or "dynamic" QR code: its 2015 edition, read in full, never uses either word, nor "redirect". Every printed QR code is fixed. The two words describe **what the stored text points to**: the destination itself, or a short link that a server can point anywhere.

### Static: the destination is in the code

Take a recipe printed on a cold brew bottle. A static code stores the recipe's address itself:

```
https://www.lavazzausa.com/en/recipes-and-coffee-hacks/homemade-cold-brew
```

That is 73 characters, printed into the code for good. To send people somewhere else you need a new code and a new print run, and if the recipe page ever moves, every bottle already on a shelf opens a dead page.

### Dynamic: the code stores a short link

A dynamic code stores a short link on the QR service's server. The same bottle's dynamic code, made with Linkbreakers, stores:

```
https://linkbreak.ing/0GXVdukcp?lbsrc=qrcode
```

The recipe's address is not in the code at all. It is saved on the server, next to the short link `0GXVdukcp`, where it can be changed at any time.

### What happens when someone scans it, step by step

1. **The camera reads the short link**, and the phone's browser sends a request to `linkbreak.ing` for `/0GXVdukcp`.
2. **The server looks up the short link** and finds the destination saved for it.
3. **The server answers with a redirect.** A redirect is a short reply in two parts: a **status code**, a three-digit number that tells the browser the page is somewhere else, and a **header** (a labelled line of the reply) called `Location`, holding the real address. This is the real answer to a scan of that bottle's code on 16 November 2026:

```
HTTP/2 303
location: https://www.lavazzausa.com/en/recipes-and-coffee-hacks/homemade-cold-brew?lbsrc=qrcode
```

4. **The browser follows the `Location`** and opens the recipe page.

```mermaid
sequenceDiagram
  participant P as Phone
  participant S as Short link server
  participant D as Destination page
  P->>S: GET linkbreak.ing/0GXVdukcp
  Note over S: Look up the destination saved for 0GXVdukcp
  S-->>P: 303 See Other, Location: recipe page
  P->>D: GET the recipe page
  D-->>P: 200, the page
```

The detour is fast: a Linkbreakers scan answers in a [median of 65 milliseconds of server time](/help/article/how-fast-is-a-linkbreakers-scan), and three quarters of scans within 77 ms.

### Why the redirect is a temporary one

To change where the code goes, you change the destination saved on the server. The printed code still holds the same short link, so the next scan gets the new answer. That only works if the phone asks the server again on every scan, which is why a dynamic QR code answers with a **temporary** redirect.

HTTP's own specification, RFC 9110, separates the two kinds:

- **Permanent: 301 and 308.** The resource "has been assigned a new permanent URI" (section 15.4.2), and a 301 or 308 is "heuristically cacheable" (section 15.1): a browser may store it and go straight to the stored address next time, without asking the server.
- **Temporary: 302, 303 and 307.** For 302, "the redirection might be altered on occasion, the client ought to continue to use the target URI for future requests" (section 15.4.3). These are not heuristically cacheable, so unless the server says otherwise, every scan asks the server for the current destination.

Linkbreakers answers with **303 See Other**, a temporary redirect that RFC 9110 describes as pointing the browser to "a different resource, as indicated by a URI in the Location header field" (section 15.4.4), and sends no caching header with it.

### What the server can do on the way

Because each scan passes through the server, it can do more than point the way:

- **Count the scan:** the time, the kind of phone from the browser's User-Agent (the line where the browser describes itself), and an approximate location from the IP address, usually at city level at best. See [what data a QR code scan can give you](/help/article/what-data-you-can-collect-from-qr-code-scans-location-device-behavior) and [how QR code tracking works from scan to analytics](/help/article/how-qr-code-tracking-works-from-scan-to-analytics).
- **Answer differently for each visitor:** another page by [country](/help/article/how-to-use-country-conditions), by [the phone's language](/help/article/how-to-route-qr-code-visitors-by-their-phones-language), by [device](/help/article/how-to-use-device-conditions) or by [the time of day](/help/article/how-to-use-scheduler-conditions), all from one printed code.
- **Ask before sending them on:** a [form](/help/article/how-to-create-a-form) can collect a name, an email or a yes to your offers before the redirect.

## Static vs dynamic QR codes: the differences

| | Static | Dynamic |
|---|---|---|
| What the code stores | the destination's full address | a short link on the QR service's server |
| Destination editable after printing | No | Yes |
| What a scan does | opens the address directly | asks the server, which redirects |
| Scan count, time, device, approximate location | No | Yes |
| Different page per visitor (device, country, time) | No | Yes |
| Form or question before the page | No | Yes |
| Keeps working if the QR service shuts down | Yes, as long as the page exists | No |
| Code size for a long address | larger (more text to store) | smaller (the short link stays short) |
| Cost | free with most tools | often paid; on Linkbreakers, every plan, Free included |

Both need an internet connection to open a web page: the phone can decode either code offline, but it cannot load the destination.

## The short link keeps the code smaller

The more characters a code stores, the more squares it needs, and the denser it prints at a given size. We measured the bottle's two addresses with the segno QR library (version 1.6.6, no error-correction boost) at each [error correction level](/help/article/understanding-qr-code-complexity-why-it-matters-for-data-storage):

**Squares per side of the code, static vs dynamic**

- **41 → 33** squares per side at level Q
- **49 → 37** squares per side at level H

| Error correction level | Static: the 73-character recipe address | Dynamic: the 44-character short link |
|---|---|---|
| L | 33 squares | 29 squares |
| M | 37 squares | 33 squares |
| Q | 41 squares | 33 squares |
| H | 49 squares | 37 squares |

Measured by Linkbreakers on 16 November 2026 with segno 1.6.6: https://www.lavazzausa.com/en/recipes-and-coffee-hacks/homemade-cold-brew (73 characters) against https://linkbreak.ing/0GXVdukcp?lbsrc=qrcode (44 characters).

| Text in the code | Characters | L | M | Q | H |
|---|---|---|---|---|---|
| `https://linkbreak.ing/0GXVdukcp?lbsrc=qrcode` (dynamic) | 44 | version 3, 29x29 | version 4, 33x33 | version 4, 33x33 | version 5, 37x37 |
| `https://www.lavazzausa.com/en/recipes-and-coffee-hacks/homemade-cold-brew` (static) | 73 | version 4, 33x33 | version 5, 37x37 | version 6, 41x41 | version 8, 49x49 |

A destination with tracking parameters (`?utm_source=...&utm_campaign=...`) grows the static code further, while the dynamic code stays the same size, because the parameters live on the server. Fewer, larger squares are easier to scan from a distance and leave more room for a logo. See [QR code scanability best practices](/help/article/qr-code-scanability-best-practices-contrast-readability-optimization).

## When static QR codes make sense

- **The destination will never change.** A permanent page you control and will never move.
- **No measurement is needed.** Personal use or internal documents where scan counts have no value.
- **The code must outlive any provider.** A static code depends on no service, only on the page it opens.

## When dynamic QR codes are the better choice

- **You print at any scale.** If the page changes after 5,000 brochures are out, a static code is broken for good; a dynamic one is fixed in seconds.
- **You want to know what works.** Which poster drove more scans, which city responded: a static code cannot tell you.
- **The offer changes over time.** Seasonal menus, promotions and events change the page without a reprint.
- **Different people need different pages.** iPhone users to the App Store and Android users to Google Play, [from the same printed code](/help/article/how-to-create-a-qr-code-for-an-app-download), or each table's own page with [one short link and hundreds of codes](/help/article/dynamic-slugs-capture-data-from-the-url-path). See [how workflows work in Linkbreakers](/help/article/what-is-a-workflow-in-linkbreakers-and-how-it-powers-automation).
- **You want to know who scanned.** A [QR code landing page](/help/article/what-is-a-qr-code-landing-page) with a form needs the scan to pass through a server first.

## Dynamic QR codes in Linkbreakers

Every Linkbreakers QR code is dynamic. The code stores the link's short address (`https://linkbreak.ing/<code>`, or your own domain on the plans that include custom domains) with `lbsrc=qrcode` added, which records the visit as a QR scan rather than a click on the link. When someone scans it, the link's **workflow** runs: the steps the server takes on a scan. The simplest workflow is one **Redirection** step holding the destination; change its address and the codes already printed open the new page. Put a condition before it, or a form, and each visitor can get their own page or leave their details first.

Dynamic QR codes and unlimited scans are on every plan, Free included (see [pricing](/pricing)). So when the menu changes, the event moves or the offer ends, the codes you already printed keep working and open the right page, without a reprint.

## Limits and caveats

**A dynamic code depends on its server.** If the service behind the short link shuts down or switches your codes off, every printed copy stops working. Before you print a long run, check what happens to your codes if you stop paying, and whether they can run on a domain you own. Linkbreakers publishes its [reliability and uptime commitments](/help/article/what-is-linkbreakers-reliability-and-uptime). If your dynamic codes are on Bitly today, [the best Bitly alternatives for QR codes](/help/article/best-bitly-alternatives) compares how often each tool lets you change a printed code's page and what each one does when you stop paying.

**A scan and a click are told apart by the address.** A Linkbreakers code adds `lbsrc=qrcode` to the short link, so a visit counts as a QR scan. Someone who types or pastes the short link without it is counted as a click on the link.

**Location from an IP address is approximate.** It reflects the network's location, often the city, never the street. See [what location data QR codes actually show](/help/article/does-a-qr-code-show-location-accuracy-limits-and-examples).

**The redirect adds a short step.** The phone makes one more request before the page. On Linkbreakers the server's part takes a median of 65 ms; the network adds its own time on top.

## Frequently asked questions

### How do I know if a QR code is static or dynamic?

Read the text inside it: most phone cameras show the address before opening it. If it is the destination's own address, the code is static. If it is a short link on a QR or link service's domain, the code is dynamic. To be sure, request the short link and look at the answer: a dynamic code's short link replies with a 3xx status code and a `Location` header, as in the example above.

### Can I convert a static QR code to dynamic?

No. A static code's destination is in its squares, and nothing can change what a printed code stores. Make a new dynamic code and print it in place of the old one.

### Do QR codes expire?

A static code never expires, but the page it opens can disappear. A dynamic code has no fixed end date either, but some providers switch dynamic codes off when the plan or trial ends: QR TIGER, Uniqode and QR Code Generator PRO deactivate them, while Bitly codes on bit.ly keep working after a downgrade (the [best Flowcode alternatives](/help/article/best-flowcode-alternatives) comparison quotes each policy). Linkbreakers codes keep redirecting if a paid subscription ends, because the workspace returns to the Free plan; a code stops only if its link is deleted or expired, or its workspace is deleted. A Free workspace can be removed after a long stretch with no visits and no member sign-in, unless support has [preserved it between seasons](/help/article/how-to-keep-your-workspace-and-qr-codes-between-seasons).

### Why does a dynamic QR code use a temporary redirect and not a 301?

Because a browser may store a permanent redirect (301 or 308) and skip the server on the next visit, so a changed destination might not reach someone who scanned before. A temporary redirect (302, 303 or 307) is not stored that way, so each scan gets the destination saved at that moment (RFC 9110, sections 15.1 and 15.4).

### Are dynamic QR codes less reliable than static ones?

They need the redirect server to answer, which a static code does not. Both need the internet to open a web page. In practice, the question that matters is how long the service behind the short link will keep it running, and what happens to your codes if you leave.

### Do dynamic QR codes collect personal data?

A scan gives technical details: the time, the device and browser, and an approximate location from the IP address. It does not give a name or an email unless the visitor fills in a form. See [what data is collected from QR code scans](/help/article/what-data-you-can-collect-from-qr-code-scans-location-device-behavior).

### Is there a visual difference between static and dynamic QR codes?

No label tells them apart. A dynamic code is often less dense, because a short link has fewer characters than a long address (see the measurement above).

## Sources

- ISO/IEC 18004:2024, Information technology: Automatic identification and data capture techniques, QR Code bar code symbology specification (4th edition, August 2024): https://www.iso.org/standard/83389.html
- ISO/IEC 18004:2015 (3rd edition), section 1 "Scope", read in full: the symbology, data encoding, symbol formats, error correction, decoding and print quality; the words "static", "dynamic" and "redirect" do not appear
- RFC 9110, HTTP Semantics, sections 10.2.2 (Location), 15.1 (cacheable status codes), 15.4.2 to 15.4.9 (301, 302, 303, 307, 308): https://www.rfc-editor.org/rfc/rfc9110
- Apple Support, Scan a QR code with your iPhone or iPad: https://support.apple.com/en-us/102680
- The live answer to a scan of `https://linkbreak.ing/0GXVdukcp?lbsrc=qrcode`, 16 November 2026 (`HTTP/2 303` with its `location` header)
- How fast is a Linkbreakers scan (median server time measured on production scans): https://linkbreakers.com/help/article/how-fast-is-a-linkbreakers-scan
- Linkbreakers pricing (dynamic QR codes and unlimited scans on every plan): https://linkbreakers.com/pricing
- Code sizes: measured by Linkbreakers with segno 1.6.6, 16 November 2026

## Last reviewed

16 November 2026, by Laurent Schaffner: the scan's redirect checked live and in the Linkbreakers api (every redirect is a 303 See Other), RFC 9110 quoted from the RFC Editor's text, the code sizes measured, the plans checked on the pricing page.
